The ceiling fan needs to be checked regularly to ensure that there are no loose fixtures and to avoid the production of clicking and squeaking noises.įinally, if your harbor breeze ceiling fan is still making the clicking noise after trying all these trouble-fixing processes, try to call a pro to fix the problem for you. ConclusionĪbove are some of the causes of clicking noise in the harbor ceiling fan and the best ways of troubleshooting the problem. Then, repeat the same procedure for all the blades. First, check whether any blade needs to be balanced by placing the balancing clip between the tip and the base of the blade. The blades are balanced using the balancing clip. Unbalanced blades in the ceiling fan may cause the production of squeaking noises. In such a case it is advisable to buy a new globe to replace the worn-out one. Moreover, the globe might be too old, having some cracks which may produce some noises. In such a case, you should ensure that the globe is tightened well to avoid noises in the fan during a spin. In some of the ceiling fans, the bulbs are covered by a globe. If the fan has loose screws, a squeaking sound is produced each time the blades will be spinning. Keep on inspecting the fan’s condition regularly since the nuts that connect the fan to the ceiling might be loose over time. When the fan is not well mounted in the ceiling, it might produce some noises when turned on. Inspect the screws joining the fan to the ceiling When adding the lubrication oil to the motor, ensure that the oil gets into the bearings by putting a few drops above the shaft as you rotate the motor to distribute the oil. That forced spinning will cause squeaking noises which may be disturbing. Moreover, the lack of lubrication to the fan motor makes the motor spin with difficulties. In addition to that, parts of the fan may get rust after some use due to a lack of lubrication oil. When the fan is not lubricated, squeaking sounds will be produced when it is running. The fan motor should always be kept lubricated to ensure that no friction will occur, causing wear and tear. But, again, fixing the bulb rightly will also reduce the noise produced by the fan. Tightening all the nuts in the fan may help reduce the noise. In addition, loose bulbs tend to produce some funny sounds which might be disturbing. Some of the ceiling fans are attached to the light bulbs, and as a result, the screws attaching the bulbs should be fixed correctly. Ensure that the bulbs are properly installed In addition to that, always inspect the blades regularly to ensure they are in the right position. Ensure that all the blades are tightened and if they are not, fix them by yourself using the screwdriver. When the ceiling fan blades are loose, the blades will move from side to side as they spin, causing noise. The dust is best cleaned using a microfiber towel and an all-purpose cleaner for wiping the blades. When cleaning the blades, ensure that you do it gently since the pressure exerted on them will cause an imbalance. The accumulation of dust in the blades causes clicking noises. Dust will always accumulate on the blades of the ceiling fan and therefore need to be cleaned often.
0 Comments
Leave a Reply. |